Southwark Streetscape Design Manual (SSDM)
Typical Details Register (SSDM/TDR)
The Typical Details Register provides standard details for the design of common features found in streets and spaces.
These include both detailed technical design details showing how materials should be assembled into a broader construction (eg for ramps or edge restraints) and arrangement details showing the typical geometric design of common features (eg an inset parking bays) but not the underlying construction.
The intention of Typical Details is to show how the requirements of documents in our Design Standards Register and the material requirements of palettes in our Street Elements Register can be assembled together.
However, these are provided for guidance only and the requirements of individual Design Standards Register documents (and other SSDM requirements) take precedence. Designers will often need to vary from the details provided considerably to meet particular site constraints.
Similarly, where designers are able to develop alternative details that meet Design Standards then these will also be acceptable. Use of Typical Details is only mandatory where this is specifically required in other SSDM documents.
You can reach the typical details using the links below.
Series 400 - Safety fences, barriers and pedestrian guardrail
- LBS-400-01 Manchester bollard (PDF, 319kb)
- LBS-400-02-02 cycle stands (PDF, 353kb)
- LBS-400-02-03 cycle stands (PDF, 357kb)
- LBS-400-04 natural stone cube bollard (PDF, 164kb)
Series 500 - Drainage and service ducts
- LBS-500-01 surface water drains trench and bedding details (PDF, 154kb)
- LBS-500-02 filter drains trench and bedding details (PDF, 176kb)
- LBS-500-03 Type 1 chamber (brick or in-situ concrete manhole) (PDF, 169kb)
- LBS-500-04 Type 2 chamber (precast concrete manhole) (PDF, 171kb)
- LBS-500-05 Type 3 chamber (precast concrete manhole) (PDF, 230kb)
- LBS-500-06 Type 4 chamber (precast concrete manhole) (PDF, 188kb)
- LBS-500-07 Type 5 chamber (precast concrete manhole) (PDF, 190kb)
- LBS-500-08 Type 5 chamber grating details (PDF, 158kb)
- LBS-500-09 chamber fittings - ladder handhold and safety chain (PDF, 166kb)
- LBS-500-10 Type 7 chamber (1050 catchpit) (PDF, 166kb)
- LBS-500-11 Type 8 chamber (600 catchpit) (PDF, 162kb)
- LBS-500-12 precast and in-situ cast gullies (PDF, 159kb)
- LBS-500-13 sumpless gully chamber and alternative rising section (PDF, 155kb)
- LBS-500-14 drainage channel blocks Types A B C and G (PDF, 153kb)
- LBS-500-15 drainage channel blocks Types D E and F (PDF, 150kb)
- LBS-500-16 detail keyways and keys (PDF, 174kb)
- LBS-500-17 edge of pavement drains (fin drains) (PDF, 181kb)
- LBS-500-18 edge of pavement drains (installation of fin drains) (PDF, 165kb)
- LBS-500-19 edge of pavement drains (installation of narrow filter drains) (PDF, 161kb)
- LBS-500-20 edge of pavement drains (under channel drainage layers) (PDF, 155kb)
- LBS-500-21 Type 9 chamber (shallow inspection chamber) (PDF, 169kb)
- LBS-500-22 Type 10 chamber (shallow inspection chamber) (PDF, 179kb)
- LBS-500-23 Type 11 chamber (deep inspection chamber) (PDF, 171kb)
- LBS-500-24 chamber fittings (guardrail) (PDF, 168kb)
- LBS-500-25 rodding eye details (PDF, 153kb)
- LBS-500-26 demarcation manhole with non-return valve (PDF, 165kb)
- LBS-500-27 drainage pipe standard connection details (PDF, 206kb)
- LBS-500-28 service ducts under verges footpaths (PDF, 189kb)
Series 700 - Road pavements general
- LBS-700-01 speed humps (PDF, 213kb)
- LBS-700-02 speed cushion (PDF, 175kb)
- LBS-700-03 pot holing (PDF, 177kb)
- LBS-700-04 general area specification (PDF, 248kb)
- LBS-700-05 highway trim (PDF, 221kb)
- LBS-700-06 highway trim (PDF, 206kb)
- LBS-700-07 recessed cover (PDF, 173kb)
Series 1100 - Kerb, footways and paved areas
- LBS-1100-01 kerbs and edge restraint types (sheet 1) (PDF, 187kb)
- LBS-1100-02 kerbs and edge restraint types (sheet 2) (PDF, 186kb)
- LBS-1100-03 kerbs and edge restraint types (sheet 3) (PDF, 182kb)
- LBS-1100-04 kerbs and edge restraint types (sheet 4) (PDF, 178kb)
- LBS-1100-05 kerbs and edge restraint types (sheet 5) (PDF, 195kb)
- LBS-1100-06 timber edge restraint (PDF, 205kb)
- LBS-1100-07 kerbs and edge restraint types (PDF, 279kb)
- LBS-1100-08 footings for edge restraints (sheet 1) (PDF, 263kb)
- LBS-1100-09 footings for edge restraints (sheet 2) (PDF, 213kb)
- LBS-1100-10 footings for edge restraints (single step edge) (PDF, 187kb)
- LBS-1100-11 footings for edge restraints (single step edge) (PDF, 181kb)
- LBS-1100-12 footings for edge restraints (dropped kerbs) (PDF, 185kb)
- LBS-1100-13 footings for edge restraints (vehicle crossings) (PDF, 185kb)
- LBS-1100-14 footings for edge restraints (inset parking bays) (PDF, 188kb)
- LBS-1100-15 footings for edge restraints (inset parking bays) (PDF, 199kb)
- LBS-1100-16 footings for edge restraints (inset parking bays) (PDF, 192kb)
- LBS-1100-17 footings for edge restraints (inset parking bays) (PDF, 192kb)
- LBS-1100-18 footings for edge restraints (raised lip kerbs) (PDF, 182kb)
- LBS-1100-19 footings for edge restraints (concealed restraint) (PDF, 196kb)
- LBS-1100-20 footings for edge restraints (concealed restraint) (PDF, 206kb)
- LBS-1100-21 footings for edge restraints (edge kerb) (PDF, 183kb)
- LBS-1100-22 footings for edge restraints (aluminium ange edge) (PDF, 192kb)
- LBS-1100-23 footings for edge restraints (c'way edge channel) (PDF, 184kb)
- LBS-1100-24 footings for edge restraints (c'way edge channel) (PDF, 186kb)
- LBS-1100-25 footings for edge restraints (c'way edge channel) (PDF, 182kb)
- LBS-1100-26 footings for edge restraints (double step edge kerb) (PDF, 182kb)
- LBS-1100-27 footings for edge restraints (raised kerb edging) (PDF, 188kb)
- LBS-1100-28 footings for edge restraints (raised kerb edging) (PDF, 185kb)
- LBS-1100-29 footings for edge restraints (natural stone set edge) (PDF, 189kb)
- LBS-1100-30 footings for edge restraints (boundary trim) (PDF, 185kb)
- LBS-1100-31 footings for edge restraints (metal studs 1) (PDF, 186kb)
- LBS-1100-32 footings for edge restraints (metal studs 2) (PDF, 199kb)
- LBS-1100-33 footings for edge restraints (timber edging) (PDF, 328kb)
- LBS-1100-34 footings for edge restraints (cross kerbs) (PDF, 189kb)
- LBS-1100-35 footings for edge restraints (cross kerbs) (PDF, 207kb)
- LBS-1100-36 footings for edge restraints (cross kerbs) (PDF, 197kb)
- LBS-1100-37 footings for edge restraints (cross kerbs) (PDF, 213kb)
- LBS-1100-38 typical details for kerb reinstatement (PDF, 176kb)
- LBS-1100-39 footings for edge restraints (raised lip c'way) (PDF, 190kb)
- LBS-1100-40 Type A - layby (PDF, 383kb)
- LBS-1100-41 Type B - layby (PDF, 331kb)
- LBS-1100-42 vehicle crossovers (PDF, 291kb)
- LBS-1100-43 vehicle crossovers (PDF, 309kb)
- LBS-1100-44 vehicle crossovers (PDF, 319kb)
- LBS-1100-45 vehicle crossovers (PDF, 407kb)
- LBS-1100-46 vehicle crossovers (PDF, 296kb)
- LBS-1100-47 vehicle crossovers (PDF, 295kb)
- LBS-1100-48 vehicle crossovers (PDF, 280kb)
Series 1200 - Road markings and traffic signs
- LBS-1200-01 post surround details (PDF, 186kb)
- LBS-1200-02 post surround details (PDF, 160kb)
- LBS-1200-03 post surround details (PDF, 168kb)
Series 1300 - Street lighting
Series 2600 - Miscellaneous
- LBS-2600-01 tree pit (PDF, 204kb)
- LBS-2600-02 tree pit (PDF, 206kb)
- LBS-2600-03 tree pit (PDF, 203kb)
- LBS-2600-04 tree pit (PDF, 207kb)
Work is currently ongoing in preparing further Typical Details. These will be individually added here as they're agreed upon. Existing agreed Typical Details may be updated from time to time so users are advised to check back regularly to ensure they're working from current versions.
Page last updated: 21 February 2024